03/25/2010
AiDi Develops World’s First Sub-10GHz Resolution Miniature Spectrometer
Tsukuba, Japan, March 25, 2010 – AiDi Corporation has developed a Fourier-Transform, Integrated-Optic Spatial Heterodyne (FISH) spectrometer with an ability to correct interferometer defects (fabrication errors) using electrical data post-processing. With its patent-pending technology, AiDi has reached the highest level of resolution at sub-10GHz.
C114
Photonics.com
HUBTECH 21
OptoIQ
03/12/2009
AiDi develops FISH for environmental and bio sensing applications
Emeryville, CA, March 12, 2009 – AiDi Corporation has announced the release of its new Fourier-Transform, Integrated-Optic Spatial Heterodyne Spectrometer (FISH) for environmental sensing and health diagnostics. AiDi has been known for its high-quality broadband optical communication products. Using its expertise in planar lightwave circuits (PLC), AiDi enters the optical sensor business by extending the boundaries of the latest technology.
C114
Le Cordacord
Telephony Online
03/10/2009
AiDi Corporation wins Global Business Award at the 4th Tsukuba Venture Award
Emeryville, CA, March 10, 2009 – AiDi Corporation, a global company that specializes in optical communication products and services for PON, metro, and access markets, has announced that it has received Tsukuba Global Business Award at the 4th Tsukuba Venture Award ceremony held in Tsukuba, Japan.
日経BP知財Awareness
Le Cordacord
Telephony Online
09/19/2008
AiDi introduces Fiber Optic Ribbon Hermetic Feedthrough
Emeryville, CA, September 19, 2008 – AiDi Corporation has advanced current wavelength-switched optical metro and access network technology with its fiber optic ribbon hermetic feedthrough. The innovation is in AiDi’s ability to use ribbons with large fiber count, and manufacture in mass quantities while retaining consistent resilience to the environmental stress conditions defined by Telcordia.
Lightwave
Fiber Optics Online
Newstin
C114
Silobreaker
Telephony Online
09/17/2008
AiDi Corporation Promotes "One-Stop Factory"at FTTH 2008
Emeryville, CA, September 17, 2008 – AiDi Corporation invites visitors to their booth at the 2008 FTTH Conference & Expo, to be held in Nashville, Tennessee, from September 22 – 24, 2008. AiDi Corporation will be promoting their "One-Stop Factory" solutions, including PLC splitter, MPO-LC fanout, CWDM MUX/DMUX, and DWDM MUX/DMUX component and module product lines. Modules can be LGX style, thin cassette style, or ultra-compact form factors, and are customizable.
Light Reading Europe
C114
China FiberOptics Online
ChinaCable Network
CCTime
EE Focus
中国石油通信网
Telephony Online
09/15/2008
AiDi Corporation Exhibits New Products at ECOC 2008
Emeryville, CA, September 15, 2008 – AiDi Corporation invites visitors to their booth at the 34th European Conference and Exhibition on Optical Communication (ECOC 2008), to be held in Brussels, Belgium, from September 22 – 24, 2008. The latest addition to the AiDi Corporation product line is the fiber optic ribbon hermetic feedthrough, which can be manufactured in volume and still withstand Telcordia environmental requirements.
Light Reading Europe
fibresystems.org
C114
China FiberOptics Online
ChinaCable Network
CCTime EE Focus 中国石油通信网
Silobreaker
Telephony Online
09/12/2008
AiDi Corporation wins 2008 TCI Business Award Emeryville, CA, September 12, 2008 – AiDi Corporation, a global company that specializes in passive optical network (PON) products and services, has announced that it has received the 2008 TCI Business Award from Tsukuba Center Inc. (TCI) in Japan.
Telephony Online
09/01/2008
AiDi appoints Dr. Katsunari Okamoto as CTO Emeryville, CA, September 1, 2008 – AiDi Corporation has announced today that Katsunari Okamoto has joined its executive management team as Chief Technology Officer. Most recently, Dr. Okamoto served as President of Okamoto Laboratory Ltd., an R&D consulting company specializing in planar lightwave circuits, and Research Professor in the Department of Electrical and Computer Engineering at the University of California, Davis.
Light Reading
Photonics.com Byte and Switch Unstrung Enterprise Insider Silobreaker Venator Partners Telephony Online
06/19/2008
AiDi Splitters: “Super” Low-Loss Patent Approved Emeryville, CA, June 19, 2008 – AiDi USA, Inc. has announced today that the U.S. Patent and Trademark Office has approved the issuance of a patent No. 7,330,620 for the company’s low-loss funnel-type PLC optical splitter with input cladding mode absorption structure and/or output segmented taper structure, filed on February 16, 2007.
06/18/2008
AiDi Releases MPO-to-LC/UPC Fan-Out Cassette With Low-Loss MPO Emeryville, CA, June 18, 2008 – AiDi USA announces the release of its highly successful MPO-to-LC/UPC Module for general availability in North and South America. This product was initially developed in response to demand from the Asian and European data communications markets, where it is currently deployed in volume.
06/15/2008
AiDi Corporation Opens Second Factory in Zhuhai and Expands Global Offices
Emeryville, CA, June 15, 2008 – Driven by increasing demand of AiDi products, AiDi Corporation has launched its second Zhuhai factory in China. The new factory is three times the size of the first, which enables AiDi Corporation to increase production capacity and improve the overall flow of production processes.
Light Reading Photonics.com
03/17/2008
AiDi Releases New Low-Loss 24-Channel MPO Connector
San Francisco, CA, March 17, 2008 - AiDi USA announced today the general availability of the Low-Loss MPO24, a 24-channel MPO connector with reduced insertion loss for use with ribbon fiber pigtails, fiber arrays, and fiber fan-out assemblies.
Lightwave EE Times Asia EE Times Asia
02/24/2008
Telcordia to Display AiDi PLC Splitters at OFC/NFOEC 2008
San Francisco, CA – February 24, 2008 – AiDi Corporation, a leading manufacturer of PLC splitters for the FTTx market, announced today that their 1x32 and 1x16 PLC splitters will be on display at the Telcordia booth at OFC/NFOEC 2008 in San Diego, CA. These products have completed the Telcordia Testing Services process to comprehensive GR-1209- CORE / GR-1221-CORE test program requirements in accordance with the Verizon FOC ITL Program.
Light Reading
Lightwave
09/27/2007
Availability of AiDi's Ultra-Compact Form Factor 1x32 Splitter Module in Americas
San Francisco, CA, September 27, 2007 – AiDi USA announces the release of its highly successful Ultra-Compact Form Factor 1x32 Splitter Module for general availability in North and South America. This product was initially developed for the Asian and European FTTx and PON markets, where it is currently deployed in volume.
Light Reading
Lightwave
08/27/2007
AiDi Corporation Exhibits New Products at ECOC 2007
San Francisco, CA, August 27, 2007 – AiDi Corporation invites visitors to their booth at the 33rd European Conference and Exhibition on Optical Communication (ECOC 2007), to be held in Berlin, Germany, from September 17 – 19, 2007.
08/24/2007
FOC ITL Qualification for AiDi Splitters
San Francisco, CA, August 24, 2007 – 1x16 and 1x32 PLC Splitters from AiDi Corporation completed the FOC ITL Qualification Process exceeding all requirements specified by Telcordia GR-1209/1221. These products are now available, already pre-qualified for telecom networks.
07/30/2007
High Quality Manufacturing with Environmental Care at AiDi Corporation
San Francisco, CA, July 30, 2007 – AiDi Corporation has received ISO 9001:2000 quality certification and ISO 14001:2004 environmental management certification.
03/15/2007
Optics Industry Innovation Lights Up with High-Quality 1x64 PLC Splitter
San Francisco, CA, March 15, 2007 – A venture backed startup, AiDi Corporation USA, has advanced current Passive Optical Networking (PON) technology with its low loss 1x64 PLC Splitter.
Light Reading
|